應該用邊隻踏呢?
以上重量以一隻計http://www.28bike.com/classifieds/detail.php?id=93395 用緊KEO Carbon 用緊碌,應該係最雞果對 用緊look keo classic
經濟D,投左一票 LOOK KEO CLASSIC.
CRC 買平D. look keo carbon I used the Shimano 105 but didn't like the float now I am using Look Keo Classic (grey). 我用緊Look既 4度鞋碼, 請問有冇ching用0度碼, 分别如何? 會唔會比較鞋上/甩look? 理論上0度的碼應該比較易甩lock的,因為沒有虛位。 0度理論上亦發力更好, 100% power transfer 但只腳lock死著完全沒虛位,要確定setting好準確,先敢用0度 我正考慮0度lock對setting準確度既要求,
擔心set得唔好有可能對關節造成傷害. 原帖由 JC 於 2010-6-28 15:34 發表 https://www.longrun.hk/forum/images/common/back.gif
我正考慮0度lock對setting準確度既要求,
擔心set得唔好有可能對關節造成傷害.
你遘得好岩
新手開始時唔使用0度住, 反正跟踏都唔會比0度你 所以我打算先揾到最fit自己既setting,
才會再試用0度鞋碼 :D 我用緊 Shimano Dura Ace ,
係石硤尾個間買,因為得呢隻,
我咩都吾識就買左,千幾個踏真係有d赤~ 暫時用緊Exustar膠踏,不過好快會換...:$ 原帖由 saikui 於 2011-5-2 13:51 發表 https://www.longrun.hk/forum/images/common/back.gif
暫時用緊Exustar膠踏,不過好快會換...:$
Exustar唔好用嗎? 我都用緊 原帖由 gforce 於 2011-5-2 21:54 發表 https://www.longrun.hk/forum/images/common/back.gif
Exustar唔好用嗎? 我都用緊
唔係個牌子唔好,而係用緊「膠」踏,想轉「碳」!食力D... 原帖由 saikui 於 2011-5-3 18:42 發表 https://www.longrun.hk/forum/images/common/back.gif
唔係個牌子唔好,而係用緊「膠」踏,想轉「碳」!食力D...
Look Keo Blade? I shifted from Look Keo system to Time Iclic system, very different experience especially the pre-opening design of the locking plate.Nearly effortless when locking in.
頁:
[1]
2