Blue Screen Error

blurmax

Anyone has knowledge how to solve the problem caused by "blue screen error" my computer encountered last evening?

http://en.wikipedia.org/wiki/Blue_Screen_of_Death

[ 本帖最後由 blurmax 於 2009-6-8 14:51 編輯 ]

blurmax

Saki,

Thanks for the info.

My only problem is I don't have any Windows Vista 安裝光碟 now.

saki

原帖由 blurmax 於 2009-6-9 09:38 發表

                               
登錄/註冊後可看大圖

Saki,

Thanks !

試試参考呢篇文
http://support.microsoft.com/kb/903251/zh-tw

blurmax

Saki,

Thanks !

saki

原帖由 blurmax 於 2009-6-9 08:25 發表

                               
登錄/註冊後可看大圖

Still failed to fix the problem.

Recorded my code last nite : 0X0000008e

Blue Screen 6.0.6001.2.1.0.768.2
BC Code 1000008e
BCP1C0000005
BCP20000000
BCP38C090A48
BCP400000000
...

你可能中左電腦病毒 "Backdoor.Haxdoor.D" ...................

blurmax

Still failed to fix the problem.

Recorded my code last nite : 0X0000008e

Blue Screen 6.0.6001.2.1.0.768.2
BC Code 1000008e
BCP1C0000005
BCP20000000
BCP38C090A48
BCP400000000

Will try again tonite

lvrunner

I also encounter the same problem as well since I installed a new nvidia card a few months ago.  It only happens once or twice a month, usually first thing in the morning.  I just ignore it.  The only thing I don't like is the blue screen showing "Beginning dump of physical memory ......1, 2, 3, 4, 5............etc".

May be I'll try to reinstall the driver to see if it works too.   Thanks.

[ 本帖最後由 lvrunner 於 2009-6-8 10:18 編輯 ]

wongc

My laptop has the same problem these days.  Sometimes the blue screen pops up before entering Windows.  Sometimes I can get into Windows and run for a few minutes bofore the blue screen pops up again.  I did the recovery process with the ghost image but still couldn't fix the problem.  I suspect that may be hardware problem.  Anyway, I'll try the suggested method to reinstall the driver & see if that helps.

saki

try this:

http://support.microsoft.com/kb/888399

You receive a "STOP 0x000000D1" error message on your Windows XP Service Pack 2-based portable computer

Summary
This article discusses the reasons why Microsoft Windows XP ServicePack 2 (SP2) may display a "STOP 0x000000D1DRIVER_IRQL_NOT_LESS_OR_EQUAL" error message on portable computers thathave an Intel Pentium M mobile processor. This error message may appearwhen users switch the computer from utility (AC) power to battery (DC)power, or vice versa.

Symptoms
When you switch your Microsoft Windows XP Service Pack 2 (SP2)-basedportable computer from AC (utility) power to DC (battery) power, orvice versa, you may receive a Stop error message that is similar to thefollowing:

STOP 0x000000D1 (0x0000000C, 0x00000002, 0x00000000, 0xF8E26A89)
gv3.sys – Address F8E26A89 base at F8E26000, Datestamp 3dd991eb

This problem may also occur at other times, depending on how your system was designed.

Cause
This problem may occur on a portable computer that is running an Intel Pentium M (Centrino) mobile processor if the Gv3.sys processor driver is force-installed on Windows XP SP2.

The Gv3.sys processor driver was released to support processor power management features on Intel Pentium M mobile processors that run Windows XP and Windows XP SP1. This driver is now obsolete and is not supported on Windows XP SP2. The Gv3.sys processor driver has been replaced by the Intelppm.sys processor driver. The Gv3.sys processor driver may have been incorrectly force-installed on Windows XP SP2 by an OEM driver utility installation program.

Solution
To resolve this problem, use the following methods to restore your processor driver to the correct driver. The correct driver, Intelppm.sys, was included with Windows XP SP2.

To determine which processor driver is installed, follow these steps:                  

• Click Start, click Run, type devmgmt.msc, and then press ENTER.
• In Device Manager, expand Processors.
• Right-click Intel Pentium M processor, and then click Properties.
• Click the Driver tab.
• Click Driver Details.

If your Windows XP SP2 system is using the Gv3.sys processor driver, you must update to the Intelppm.sys processor driver to correct this problem. To do this, follow these steps.                  

• Click Start, click Run,  type devmgmt.msc, and then press ENTER.
• In Device Manager, expand Processors.
• Right-click Intel Pentium M processor, and then click Update Driver.
  
  The Driver Update Wizard will start.
• If you are prompted Can Windows connect to Windows Update to search for software?, click No, not at this      time, and then click Next.
• Click Install the software automatically (Recommended), and then click Next.
• Click Finish.

You must restart your computer to complete the installation.

[ 本帖最後由 saki 於 2009-6-8 17:27 編輯 ]

blurmax

Once I start my computer for a while the "blue screen" start.

May be it's caused by the MSM messenger.  I tried to remove it in safe mode tonite.

hellobbandre

原帖由 blurmax 於 2009-6-8 16:19 發表

                               
登錄/註冊後可看大圖

hellobbandre,

How did you fix it?

應該係你 run 某D 野果時先出事, 做其他係無問題既,真係好可能係同個 display 既 driver 唔夾, 可以試下 uninstall 個 display driver, 再 reinstall, 再睇下有無問題.

blurmax

hellobbandre,

How did you fix it?

hellobbandre

原帖由 blurmax 於 2009-6-8 15:22 發表

                               
登錄/註冊後可看大圖

Gills and Saki,

Thanks for the advice.  Will try the methods tonite.

However I recalled the screen is similar to this :

http://jmobley123.files.wordpress.com/2008/10/blue-screen-of ...

我試過喇,有時係D Drivers 唔夾, 就會話唔知咩野 memory error 架喇. hgj091" />" />hj

又或者個 Drivers 用用下 short 咗, 最 common 係 display card 既 driver 同你用緊既 hardware 唔夾, 我上次都係 re-install  nvidia 個 driver, 又玩得返個 Game 喇.

[ 本帖最後由 hellobbandre 於 2009-6-8 16:18 編輯 ]

blurmax

Gills and Saki,

Thanks for the advice.  Will try the methods tonite.

However I recalled the screen is similar to this :

                               
登錄/註冊後可看大圖

[ 本帖最後由 blurmax 於 2009-6-8 15:25 編輯 ]

Gills

Blurmax兄, 有冇記低藍畫面既Message, 如果冇嘗試抄低, 再係Gxxgle度試吓Search.

saki

試試用 gills 講的 " Last Know Good Condition" 登入windows

唔得得話唯有
1) 用其他防毒去試有無中木馬............
2) disconnect 每一件硬件及重裝driver 去試,
3) Uninstall每一個軟件去試

再唔得唯有重裝 windows..........

blurmax

No virus was found

saki

原帖由 blurmax 於 2009-6-8 13:07 發表

                               
登錄/註冊後可看大圖

No, I can entered my computer by Safe mode, and had scanned it by Norton tim.

Norton有無話你中了什麼毒???

blurmax

No, I can entered my computer by Safe mode, and had scanned it by Norton tim.

saki

連safe moed 入唔到.......開機時有無出現個  windows logo??

如無, 我想多數是壞了下面是但一樣
1. 底版 !!!!!
2. ram
3. BIOS 炒左...........