升級
100%
TA的每日心情 | 開心 2013-10-12 00:00 |
---|
簽到天數: 4 天 [LV.2]偶爾看看I
|
try this:
http://support.microsoft.com/kb/888399
You receive a "STOP 0x000000D1" error message on your Windows XP Service Pack 2-based portable computer
Summary
This article discusses the reasons why Microsoft Windows XP ServicePack 2 (SP2) may display a "STOP 0x000000D1DRIVER_IRQL_NOT_LESS_OR_EQUAL" error message on portable computers thathave an Intel Pentium M mobile processor. This error message may appearwhen users switch the computer from utility (AC) power to battery (DC)power, or vice versa.
Symptoms
When you switch your Microsoft Windows XP Service Pack 2 (SP2)-basedportable computer from AC (utility) power to DC (battery) power, orvice versa, you may receive a Stop error message that is similar to thefollowing:
STOP 0x000000D1 (0x0000000C, 0x00000002, 0x00000000, 0xF8E26A89)
gv3.sys – Address F8E26A89 base at F8E26000, Datestamp 3dd991eb
This problem may also occur at other times, depending on how your system was designed.
Cause
This problem may occur on a portable computer that is running an Intel Pentium M (Centrino) mobile processor if the Gv3.sys processor driver is force-installed on Windows XP SP2.
The Gv3.sys processor driver was released to support processor power management features on Intel Pentium M mobile processors that run Windows XP and Windows XP SP1. This driver is now obsolete and is not supported on Windows XP SP2. The Gv3.sys processor driver has been replaced by the Intelppm.sys processor driver. The Gv3.sys processor driver may have been incorrectly force-installed on Windows XP SP2 by an OEM driver utility installation program.
Solution
To resolve this problem, use the following methods to restore your processor driver to the correct driver. The correct driver, Intelppm.sys, was included with Windows XP SP2.
To determine which processor driver is installed, follow these steps: - Click Start, click Run, type devmgmt.msc, and then press ENTER.
- In Device Manager, expand Processors.
- Right-click Intel Pentium M processor, and then click Properties.
- Click the Driver tab.
- Click Driver Details.
If your Windows XP SP2 system is using the Gv3.sys processor driver, you must update to the Intelppm.sys processor driver to correct this problem. To do this, follow these steps. - Click Start, click Run, type devmgmt.msc, and then press ENTER.
- In Device Manager, expand Processors.
- Right-click Intel Pentium M processor, and then click Update Driver.
The Driver Update Wizard will start. - If you are prompted Can Windows connect to Windows Update to search for software?, click No, not at this time, and then click Next.
- Click Install the software automatically (Recommended), and then click Next.
- Click Finish.
You must restart your computer to complete the installation.
[ 本帖最後由 saki 於 2009-6-8 17:27 編輯 ] |
|